New Releases

New Release, Projects, Tutorials, Updates

Like some of the tutorials I’ve done but don’t want to dig back in the blog to find them? Well I am currently working on making them available as pdf downloads on my etsy site.

Available so far Doll Dress Tutorial, Lace Earrings Tutorial, Coffee Cup Sleeve Tutorial, Breast Pad Tutorial and Two in One Dress/Skirt Tutorial. More to come as I manage to go through the archives and get blog posts converted to useable pdf documents.

Advertisements

Project Post – Leftover Skirt, a tutorial

Projects, Tutorials

I have been using the project feature of the Threadbias.com site and really enjoying being able to track my projects. Periodically I will be posting copies here.

After finishing the Sweet Pea Dress I had bit of swaddle left so I decided to make a skirt for the little girl.

Fabric: leftover Aden & Anais swaddle and leftover brown slug jersey from the A&A Sweet Pea Dress

Pattern: a bunch of rectangles. Not very exact or anything but this is what I did.
Waistband – Hip plus ease wide x desired (what looked right) hight. I folded the whole thing in half to make the elastic casing.
Skirt – max hight x max length I could get out of the remnant of swaddle, I then cut it in half so pocket could be added in the side seams.
Pockets – what I could get that would fit a child’s hand folded in half.
Skirt lining – same hight as skirt minus about 1/2″ x hip plus ease.

Sewing: Prep sewing – instead of serging I folded the short edge of the skirt and the pocket opening edges of the pockets for a clean finish. (I don’t have my serger set up yet and didn’t what to have to do so). I then did a french seam on the bottom of the pockets ending 1/2″ from the open edge.
Adding pockets – I seamed the open edge of the pockets to the side seams with at 3/8″ SA and the under stitched the SA to the pocket. Next it sewed the side seams with a 1/2″ SA.
Waist band – I seamed the single seam with 1/2″ SA making a tube. I then folded it in half. And place the seamed elastic inside.
Joining the two – I used a double line of gathering to match the skirt to the waist band. I then basted the two together with a 3/8″ SA. This just kept things more stable and manageable to put the lining in.
Lining – I seamed the single seam making a tube. I then seamed it to the waistband/skirt combo with a 1/2″ SA. I kept the SA facing down towards the lining and under stitched it in place.

Project Post – A&A Sweet Pea swaddle dress

Projects

I have been using the project feature of the Threadbias.com site and really enjoying being able to track my projects. Periodically I will be posting copies here.

The wee boy is getting bigger and not needing all his Aden and Anais swaddles so I decided to make something else out of them. The fabric is lovely and they are a good size blanket giving me plenty of yardage to work with. Although the Sweet Pea dress is a dress it also works nicely as a tunic top. It has raglan sleeves and an easy fit which seems quite fitting for the lightness of the fabric. It also allows for a lot of flexibility in sizing. My daughter wore the ones I made her for quite a long time.

Pattern: Sweet Pea Dress – on Threadbias (Also available on Etsy)
 
Fabric: Aden & Anais monkey print swaddle, brown slub jersey
 
Prep: Since I’ve washed the swaddle a few times it has developed this nice waffle texture, great for a blanket but not so good for cutting so ironing it first. I’m also removing the A&A tags so they can be added back as a reminder of where the fabric came from.

Cutting: The swaddles are not very stable so I like to use underlay to keep it from shifting around. The trick to using underlay is to use a paper that is more stable then the one you are cutting. I’m using jersey for the band and to make things simple I’m putting on the fusing before I cut the pieces out. Both have to be cut anyways just this way the jersey is stablized before cutting instead of after.

I guess I have to get my sewing machine set up, something I haven’t done yet since moving.

Sewing: Even though I wrote the instructions I’m still having to follow them since it’s been a while since I last made one of these dresses. A trick for sewing fused placket facings: if you want a clean finish on the open edge, seam the fusing to the facing along that edge (wrong side and glue side out) and fold glue side in before ironing. The seam allowance ends up under the fusing leaving a nice clean edge. (see the picture.)
To cut down on how flouncy the pleats are, (this dress if for a boy,) I tacked the pleats for the first 1 1/4″ leaving 3/4″ visible once the band is on.
I opted to use french seam since the fabric is so light (serging may just pull out), makes for a soft inside and gives it a heirloom feel.
I stay stitched the edge of the band facing to make it easier to fold and more stable.

Finishing: I finished it with elasticized sleeve hem, a wide bottom hem and snap closures.

Want to see what I did with the leftover fabric? Check out the Leftovers skirt, a tutorial.

New Release! Maternity Tops

New Release

It seemed to take forever to get these patterns ready and listed but I finally managed to get the maternity versions of the Park and Parkette done. Now I’m finally getting to posting about it.

It started way back with the design of the Parkette top, the short sleeve slightly simplified version of the Park top. I was nearly finished it and the mini me versions (both are nearly ready but not available yet) when I got pregnant and needed something to wear. At 23 week I did technically still fit my Park and Parkette top but the fit is kind of off, now at 37 weeks a maternity version is a necessity. Lucky for me since they are my own patterns the simple solution was making a maternity version of them.

The fit is what really makes the style of a top and how wearable it is. The difficultly with maternity is you can’t just go up a size. I remember trying on one of my husbands tshirts nearing the end of my first pregnancy (at the point when our waist sizes matched) and thinking even if this “fits” it still looks like a sack on me. I do not like wearing sacks. Sacks are rarely attractive on anyone.

For my patterns I have added extra in the bust as well as the belly while leaving the back, shoulders and neckline relatively alone only adjusting what was needed to match. The result is a top the looks for the most part like its non-maternity counterpart, it just fits better.

Non-maternity vs. maternity at 23 weeks

20130731-230544.jpg

The Parkette top maternity with a growing belly, 26 weeks vs. 35 weeks
20130731-230604.jpg

Project Post – Breast Pads

Projects

I have been using the project feature of the Threadbias.com site and really enjoying being able to track my projects. Periodically I will be posting copies here.

With the arrival of the wee boy imminent I have busily been try to finish off all my baby projects, the latest being breast pads. When I had my first baby I had these wonderful bamboo terry, large, fitted breast pads, I loved them. Later when a friend of mine got pregnant I lent them to her and she loved them as much as I did. Now that we are both pregnant again we are lamenting their disappearance, not to mention that our breast feeding days of needing them will over lap. Step in the popularization of DIY cloth diapering and supplies needed to the rescue! I ordered PUL (think diaper covers) and diaper flannel for us to make our own.

The pattern is pretty simple, just a circle with a small dart. I experimented with size of circle and dart in tissue paper before making in out of card. I settled on a generous 5″ diameter with a 1″ dart.

For fabric we are using 1 yard PUL (Polyurethane Laminate) 1Mil and 5 yards of Diaper Flannel.

To get ready for cutting I cut/ripped the flannel into 1 yard strips to match the PUL and divided the PUL into 2 pieces the same width as the flannel (it is about half the width of the PUL). I then used my card pattern to trace a marker for the pattern directly onto the PUL.

To cut the PUL was layered on top of 2 layers of flannel and all layer cut together in 2 sets (perfect for two people cutting).

For sewing I kept the fabric in the same layered order as cutting and sewed all the darts in one string (no trimming threads in between). We then separated the pieces while at the same time assembling the pad, keeping the order of cutting and staggering the dart seams for a more comfortable fit. In sets of three layers each pad then had the edge serged securing all the layers together. I did find that the right side of the PUL wanted to stick/grab against the pressure foot but a light dusting of cornstarch fixed that.

We now have a total of 80 pads making 40 sets giving us each 20 sets each. I don’t think we will have to worry about not having enough.

Download a PDF of the pattern – Breast Pads

 

 

A New Year and Dinosaurs

New Release, Tutorials, Updates

It’s a new year already, and it amazes me how much I’ve got done but yet to finish. This past year I’ve managed to start a variety of patters but all but one is still in the works. They all are close to being done but something has kept me from managing to complete them. This year I hope to change that and I think I have started out on a good foot thanks to dinosaurs and cold weather.

The wee girl does not like to dress for the weather. Even when it’s cold and she’s shivering she will still flat out refuse to wear coats, hats, socks, etc. As an attempt to entice her into dressing warmer I thought I’d make sure it was stuff she’d want to wear. First I tried getting her into a hoodie by turning it into a dinosaur hoodie. I used this tutorial from Ginger & George. It works sometimes, like when she wants to go rawring and stomping around in it.

Then I tried I knitted her a hat, a dinosaur hat at no less. Well at lest she will wear the hat.

The pattern turned out super cute so I decided to release it. This is my first knitting pattern and with that and I’m a left handed knitter I learned tons!  Julie from Feather Press Knits has been and continues to be a huge help. The Dinosaur Hat is available on both Etsy and Ravelry.

Better late then never – Tutorial

Tutorials

I was really hoping to make this post much earlier but my summer got away on me. Better late then never, here is the dress/skirt tutorial I put together this summer. This is a super easy to draft and sew tutorial for a for a dress you can wear as a skirt or a skirt you can wear as a dress. Either way I found it a versatile piece I’ve worn everywhere from the beach to date night to my daughters gym class. Enjoy!

(Sneek peek at the Parkette Top and Angel Wing Parkette Top patterns which are in the works)

Progress!

Updates
P81

I am making progress! Even if I haven’t managed to get my tutorial out yet (just need to finish testing). The next set of patterns are graded and are staring testing so here is a sneak peek at the Parkette Top and Mini Me Parkette Top.

The Parkette Top is based on the Park Top but with shorter sleeves and clean finish neckline and the Mini Me version will fit sizes 3 months to kids size 8.

So with out further ado, a quick pic of the first sample.

Coming Soon!

Updates

I am working on some new stuff! First up is a Two in One Dress/Skirt tutorial, perfect for warm weather. I am also expanding the Park Top family with two new styles; Parkette and Angel Wing Parkette. Based on the Park Top they share the same fit but with shorter sleeves. To make it even more fun I’m releasing Mini Me versions for kids too.

Hoping to get the tutorial out this week! (Sneak peek at the new top then too!)

Batsypatternsdressskirttutorial